12" Planer and Thicknesser

A solid and well finished industrial planer thicknesser with cast iron beds, and a long tilting fence which can be positiones at any point across the table. The 4 knife cutterblock is powered by a 3hp motor and is capable of a cut up to 5mm deep in a single pass. To gain better visibility and access for thicknessing, both of the planing beds are hinged and swing out of the way. A dust hood / cutter gaurd is then swung into position. The feed roller drive can be disengaged when planing to save motor power and general wear.

Supplied with 4 knives, 100mm dust extraction outlet and cable.