Commander Lathe

Features:

  • Heavy Duty and Wide Bed

  • Massive 103mm Spindle Bore

  • Induction Ground and Hardened Bedways

  • Gap Bed

  • Carriage Lubrication

  • Slow Start Clutch

  • Leadscrew & Power Feed Overload Protection

  • Rapid Feed

  300/1500 330/2000 330/3000 400/2000 400/3000
Distance between Centres 1500mm 2000mm 3000mm 2000mm 3000mm
Swing over Bed 660mm 660mm 660mm 800mm 800mm
Swing over Carriage 460mm 460mm 460mm 600mm 600mm
Swing in Gap 700mm 700mm 700mm 1000mm 1000mm
Gap Length 280mm 280mm 280mm 280mm 280mm
Bed Width 400mm 400mm 400mm 400mm 400mm
Spindle Speed
Forward (18)
Reverse (6)
9-1275rpm
16-816rpm
9-1275rpm
16-816rpm
9-1275rpm
16-816rpm
9-1275rpm
16-816rpm
9-1275rpm
16-816rpm
Spindle Bore 103mm 103mm 103mm 103mm 103mm
Spindle Taper D1-11
MT6		 D1-11
MT6		 D1-11
MT6		 D1-11
MT6		 D1-11
MT6
Longitudinal Feed (72) 0.073-4066mm/rev
Transverse Feed (72) 0.036-2.033mm/rev
Rapid Feed
Longitudinal/Transverse		 5.5/2.35m/min
Max. Crosslide Travel 325mm 325mm 325mm 325mm 325mm
Max. Top Slide Travel 110mm 110mm 110mm 110mm 110mm
Thread Cutting Range
Metric (72)
Imperial (72)
Module (36)
Diametric (36)
0.5-112mm
¼-56TPI
0.5-7
4-56
0.5-112mm
¼-56TPI
0.5-7
4-56
0.5-112mm
¼-56TPI
0.5-7
4-56
0.5-112mm
¼-56TPI
0.5-7
4-56
0.5-112mm
¼-56TPI
0.5-7
4-56
Tailstock Taper MT6 MT6 MT6 MT6 MT6
Tailstock Diameter 90mm 90mm 90mm 90mm 90mm
Tailstock Quill Travel 150mm 150mm 150mm 150mm 150mm
Tailstock Cross Adjustment 10mm 10mm 10mm 10mm 10mm
Supply 400V 400V 400V 400V 400V
Motor 7.5Kw 7.5Kw 7.5Kw 7.5Kw 7.5Kw
Dimensions mm (LxWxH) 3033
x
1250
x
1360		 3560
x
1250
x
1360		 4542
x
1250
x
1360		 3561
x
1250
x
1430		 4542
x
1250
x
1430
Weight 3250Kg 3500Kg 3900Kg 3650Kg 4050Kg

Standard Accessories:

  • 2-Axis Digital Readout

  • 3-Jaw Chuck

  • 4 Way Toolpost

  • Face Plate

  • Fixed Steady

  • Traveling Steady

  • Coolant System

  • Manual & Parts List

 
Copyright © 1990-2008 Chester UK Ltd -- All Rights Reserved --  Specifications, while deemed accurate, are not guaranteed E&0E