| |
| |
(view basket) |
|
|
Craftsman Lathe
| Price |
£1549.00 |
| Stock |
|
| Optional Accessories |
|
| |
More Tooling Available in our Tooling
Section |
Features:
-
Engineered from High Grade Castings
-
Gap bed
-
Independent Feed and Leadscrew
-
Cuts left and right hand threads
-
'V' Way Bedways Induction hardened and Ground
-
Low Voltage Motor Controls
-
Carriage mounted Spindle Control
-
Metric/Imperial Dial Graduations
-
Back Gear Drive
-
Powered Cross Feed
-
'T' Slotted Cross Slide
| Swing
Over Bed |
300mm |
12" |
| Swing
Over Cross Slide |
200mm |
8" |
| Swing
in Gap |
450mm |
18" |
| Distance
Between Centres |
570mm |
23" |
| Hole
Through Spindle |
36mm |
|
| Spindle
Mount |
2¼"x8TPI |
| Spindle
Taper (With Sleeve) |
MT5
(MT3) |
| Number
of Spindle Speeds (with Backgear) |
12 |
| Range
of Spindle Speeds |
50
- 1200
Low Gear
50/75/100/120/165/220
High Gear 300/410/550/655/900/1200 |
| Feed
Range |
0.12
- 0.42mm/rev |
| Number
of Inch Threads |
40 |
| Range
of Inch Threads |
4
- 112TPI |
| Number
of Metric Threads |
27 |
| Range
of Metric Threads |
0.25
- 7.5mm |
| Max
Tool Size |
16mm |
5/8" |
| Compound
Slide Travel |
100mm |
4" |
| Cross
Slide Travel |
150mm |
6" |
| Carriage
Travel |
440mm |
17" |
| Tailstock
Spindle Travel |
100mm |
4" |
| Taper
in Tailstock Spindle |
MT3 |
| Width
of Bed |
190mm |
8" |
| Overall
Dimensions with Stand (LxWxH) |
1370x740x1233mm |
| Main
Motor |
1½HP,
240V or 415V |
| Net
Weight |
390Kg |
Standard Accessories:
- 160mm 3-Jaw Self Centering Chuck
- 4-Jaw Independent Chuck
- Fixed Steady
- Travelling Steady
- Machine Stand
- Splash Guard
- Machine Tray
- 4-Way Indexing Toolpost
- MT3 Steel Centres x2
- Centre Sleeve MT5-MT3
- Face Plate
- Thread Chasing Dial
- Manual & Parts List
|
Copyright © 1990-2008 Chester UK Ltd -- All Rights Reserved
--
Specifications, while deemed accurate, are not guaranteed
E&0E
|
|
|
