|
Model B-Super 3-in-1
'The Original Multi-Purpose Machine' often copied,
but never bettered
Note: Shown on Optional Stand &
Guards removed for clarity
| Price |
£779.00 |
| Stock |
|
| Optional Accessories |
|
| |
More Tooling Available in our Tooling
Section |
The 'Original' Chester Multi-Purpose Machine is
capable of turning, milling, drilling and thread cutting.
Built from cast iron and with a large 16" swing and 20" between
centres, the Multi-Purpose Machine is the answer to all the Model
Engineer's needs!
 
Note: Guards removed for clarity
Benefits & Features:
-
Larger Milling Table 150x300mm
-
Adjustable-height mill/drillhead increases
working area by 30%.
-
MT3 spindles right around - reducing the need
for duplicate tools.
-
Microfeed handle for precision milling.
-
Millhead accepts MT3 tooling.
-
A massive 420mm (16½In) swing over bed.
-
14 speeds for milling and 7 speeds for the lathe
spindle
-
360ø Mill head rotation.
-
No Volt Switch Gear as standard (NVR).
-
Door interlocked switch fitted inside belt
cabinet.
-
Toolpost and chuck guards as standard.
-
Standard 12mm(M10) table T-slots for tools and
accessories.
-
Offset tailstock for small tapers and greater
accuracy.
-
Strong rigid construction for good stability.
-
You'll get quick and sure readings from dials.
-
Indexing dials marked in graduations of
0.05mm/0.002"
-
More imperial and metric screw cutting
possibilities than any other machine of its type.
| Swing
over bed |
420mm |
| Centre
height |
210mm |
| Swing
over cross slide |
160mm |
| Distance
between centres |
520mm |
| Spindle
bore |
19mm |
| Spindle
taper |
MT3 |
| Tailstock
taper |
MT3 |
| Spindle
speeds (7) |
160 - 1360 rpm |
| Cross
slide travel |
190mm |
| Top
slide travel |
80mm |
| Carriage
Travel |
470mm |
|
Milling
Table |
300x150mm |
| Screw
cutting - Metric Leadscrew |
Metric 0.2 -
3mm
Imperial 8 - 120TPI |
| Tailstock
travel |
80mm |
| Bed
width |
140mm |
| Leadscrew
- Metric Machine |
4mm Acme Pitch |
|
MILL
HEAD
|
|
| Taper |
MT3 |
| Drawbar |
M12 |
| Spindle
stroke |
80mm |
| Max.
Dist Spindle to Column |
135mm |
| Milling
table |
200 x 150mm |
| Mill
head speeds (14) |
117 - 1300rpm |
| Length |
1090mm |
| Width |
690mm |
| Height |
930mm |
| Weight
- net |
155Kg |
| Motor |
¾HP |
| Supply |
240V |
| Crate
Size (LxWxH) |
1150x500x1000mm |
Standard Accessories:
- 100mm 3-Jaw Chuck with Internal & External Jaws
- MT3 Dead Centres x2
- 1-13mm Drill Chuck & MT3 Arbor
- M12 Drawbar
- Dual Purpose Compound Slide/Machine Vice
- NVR Switch Gear
- 4-Way Indexing Toolpost
- Lathe Chuck & Drill Chuck Guards
- Lathe Tool Set
- Lathe Chuck Guard
- Drill Chuck Guard
- Lathe Toolpost Guard
- Manual & Parts List
|
(view basket)
