|
Rotary Tables and Indexers
Free delivery (UK Mainland) on all orders over £25
| Product Name: |
Rotary Tables |
 |
| |
| |
Table |
Base |
|
|
| Model |
D |
H |
D |
H |
Bolt Slots |
Centre Sleeve |
|
HHV-100 |
110 |
26 |
145 |
130 |
|
MT2 |
| HHV-150 |
150 |
92 |
220 |
160 |
18 |
MT2 |
|
HHV-200 |
200 |
120 |
310 |
225 |
18 |
MT3 |
| HHV-250 |
250 |
120 |
320 |
280 |
18 |
MT3 |
|
HHV-300 |
300 |
140 |
410 |
325 |
18 |
MT4 |
| HHV-350 |
350 |
140 |
460 |
380 |
18 |
MT4 |
|
HHV-400 |
400 |
140 |
510 |
435 |
18 |
MT5 |
|
| Price (£): |
|
| Product Description: |
The
work table is graduated 360 degrees around
its circumference and is driven by a
precision worm and gear, providing a 90:1
reduction ratio. One turn of the
handle moves the table through 4 degrees.
The dial is graduated in divisions on 1 min
and the vernier scale allows readings down
to 10 seconds. The worm is hardened
and precision ground. Both the upper
and lower surfaces are precision ground. |
|
| Product Name: |
Tailstock for Rotary Tables |
 |
 |
| |
|
|
|
|
Centre Height |
| |
For |
A |
B |
C |
Max |
Min |
| TS-0 |
HHV-100/150 |
125 |
107 |
165 |
114 |
100 |
| TS-1 |
HHV-200/250 |
230 |
247 |
210 |
190 |
110 |
| TS-2 |
HHV-300 |
230 |
280 |
210 |
220 |
140 |
| TS-3 |
HHV-350/400 |
230 |
330 |
210 |
264 |
184 |
|
| Price (£): |
|
|
| Product Name: |
Dividing Plates |
 |
| |
| |
Suitable For |
| DP-1 |
HHV-100/150 |
| DP-2 |
HHV-200/250 |
| DP-3 |
HHV-300/350/400 |
The HHV150 Rotary Table comes
complete with Dividing Plates when
ordered
|
| Price (£): |
|
| Product Description: |
The
Dividing Plate Set consists of 2 Indexing
Plates, a Sector and a Handle with Plunger.
Using this Dividing Plate Set the indexing
of 2 to 100 divsions can be attained quickly
and accurately. |
|
| Product Name: |
Semi-Universal Dividing Head |
 |
| |
click here for more
information
from £199.75 |
| Price (£): |
|
| Product Description: |
Semi-Universal Dividing Head is a simplified
type of Universal Index Centre and can be
used for direct and indirect dividing.
No accessories for the differential dividing
and spiral work are included, but the whole
construction of the dividing head and
tailstock are identical with those of the
universal type. The unit has a Direct
Indexing Plate with 24 holes enabling the
direct division of 2, 3, 4, 6, 8, 12 and 24.
Three further Indexing Plates are provided
as standard to facilitate indirect dividing
from 2 to 50 and also most useful divisions
up to 360. |
|
| Product Name: |
Universal Dividing Head |
 |
| |
click here for more
information
£538.15 |
| Price (£): |
|
| Product Description: |
The
Universal Dividing Head has been
designed to carry out all types of gear
cutting. Precision dividing and spiral work
(except Type BS-0, and BS-1) with greater
precision and efficiency than has been
possible before. The center face can be
tilted from a horizontal position of 90o
down to -10o from vertical, and inclinations
can be read off a scale graduated in
degrees.
The center is built to highest engineering
standards and is factory inspected and
tested to assure complete satisfaction. The
ratio of worm to gear is 1:40. |
|
|
(view basket)
