Universal Dividing Head BS-2

The Universal Dividing Head has been designed to carry out all types of gear cutting. Precision dividing and spiral work (except Type BS-0, and BS-1) with greater precision and efficiency than has been possible before. The center face can be tilted from a horizontal position of 90o down to -10o from vertical, and inclinations can be read off a scale graduated in degrees.

The center is built to highest engineering standards and is factory inspected and tested to assure complete satisfaction. The ratio of worm to gear is 1:40.

DIMENSIONS
UNIVERSAL DIVIDING HEAD BS-2 Unit: mm/in
NO Model A B H h a b g Taper of Center Weight (kg)
D-07 BS-2 365 1413/32 272 1045/64 236 919/64 132.7 515/64 213 825/64 134 59/32 16 5/8 B & S No.10 73
 
TAIL STOCK for UNIVERSAL DIVIDING HEAD BS-2 Unit: mm/in
NO Model A1 a1 b1 g1 H1 Center Height (h2) Weight (kg) Measurement m3
D-07 BS-2 194 741/64 177 662/64 125 459/64 16 5/8 147 550/64 Max Min Packed with the Dividing Head
138 115
 
STANDARD ACCESSORIES
Dividing plate A, B, C.
Number of holes of dividing plate (worm gear reduction ratio 1:40)
Number of holes Plate A 15 16 17 18 19 20
Plate B 21 23 27 29 31 33
Plate C 37 39 41 43 47 49

 

 

 
Copyright © 1990-2008 Chester UK Ltd -- All Rights Reserved --  Specifications, while deemed accurate, are not guaranteed E&0E